SATO M-8485Se - Page 6

SECTION 4. CLEANING AND MAINTENANCE
Introduction ..............................4-1
Adjusting the Print Quality .......................4-1
Darkness ..............................4-1
Print Speed .............................4-2
Cleaning the Print Head, Platen and Rollers ..............4-2
Cleaning the Sensors and Paper End Switch ..............4-4
Replacing the Print Head ........................4-5
Replacing the Fuse ...........................4-6
SECTION 5. PROGRAMMING
Introduction ..............................5-1
The SATO RISC Programming Language ................5-1
Selecting Protocol Control Codes....................5-2
Using Basic ...............................5-2
The Print Area.............................5-4
Rotated Fields .............................5-7
Command Default Settings .......................5-8
Opposite Hand Models .........................5-9
Command Code Page Reference ....................5-10
Bar Codes..............................5-11
Bar Codes, Expansion .......................5-16
Bar Codes, Variable Ratio .....................5-17
Base Reference Point ........................5-19
Characters, Custom Designed ...................5-21
Character Expansion ........................5-23
Character, Fixed Spacing ......................5-25
Character Pitch ...........................5-26
Character, Proportional Spacing ..................5-28
Clear Print Job(s) and Memory...................5-29
Continuous Forms Printing .....................5-30
Copy Image Area ..........................5-31
Fonts, U, S, M, OA, OB, XU, XS and XM ..............5-33
Fonts, Raster ............................5-35
Fonts, Vector ............................5-36
Fonts, WB,WL, XB and XL .....................5-38
Form Feed .............................5-40
Form Overlay Recall ........................5-41
Form Overlay Store.........................5-42
Graphics, Custom..........................5-43
Graphics, BMP ...........................5-45
Graphics, PCX ...........................5-46
Job ID Store ............................5-47
PN9001073RevC