SATO M-8485Se - Page 96

Special Notes 1. Use the Print Position commands (V and H) to locate the new
area for the duplicate image.
2. Position of the new target area must not be inside the original
image.
3. If you use the Rotate command, V, H, X and Y axis will be
reversed.
4. If the reference area of the target image exceeds the print area, it
will not be printed.
5. The allowable ranges for these fields are as follows:
Page5-32PN9001073RevCSATO“Se”PrintEngines
Section 5. Programming Reference
M-8459Se M-8460Se M-8485Se M-8490Se
Horizontal
aaaa
cccc
0001
to
0896
0001
to
1216
0001
to
1024
0001
to
1344
Default
Vertical
bbbb
dddd
0001
to
1424
0001
to
1424
0001
to
1424
0001
to
2136
Expanded
Vertical
bbbb
dddd
0001
to
9999
0001
to
9999
0001
to
9999
0001
to
9999