4 Operation and Configuration
133
S84-ex/S86-ex Operator Manual
COMPATIBLE MODE HEAD SIZE
Set the head width for S86-ex series models.
The options vary depending on the head density. Corresponding head
width are as follows:
Note
• Shows for S86-ex series models only and if COMPATIBLE MODE is set
to ON.
• Refer to Section 8.3.2 Compatible Mode - Print Head Width (only for
S86-ex printer) for details on the affected items.
COMPATIBLE MODE DARKNESS
Enable or disable the system command Print Darkness <#E>.
• ENABLE: Enable you to execute the Print Darkness <#E>.
• DISABLE: Ignore the Print Darkness <#E>.
Model Name Option Head Width
(mm)
S86-ex (203 dpi) NORMAL 167.5
M8460Se 152.0
M8485Se 128.0
S86-ex (305 dpi) NORMAL 167.5
M8465Se 152.0
To Next Page
Loading...
