SATO s84ex - Maintenance Using the Cleaning Sheet

6 Cleaning and Performing Printer Adjustments
245
S84-ex/S86-ex Operator Manual
6.2.2 Maintenance using the Cleaning Sheet
The maintenance procedure using the cleaning sheet is as follows:
1 Make sure that the printer is in power off
mode, then disconnect the power cord
from the AC outlet.
2 Open the top cover.
CAUTION
Open the top cover fully to prevent accidental drop of
the cover.
3 Turn the head lock lever  clockwise to
unlock the print head.
CAUTION
• The print head and its surroundings are hot after
printing. Be careful not to touch it, to avoid being
burned.
• Touching the edge of the print head with your bare
hand could cause injury.
4 Place the cleaning sheet  between the
print head and the platen roller.
Note
Align the rough side of the cleaning sheet adjacent to
the print head.
1
2