SATO s84ex - Adjusting the Buzzer Volume; Adjusting the Display Brightness

4 Operation and Configuration
59
S84-ex/S86-ex Operator Manual
4.2.2 Adjusting the Display Brightness
In normal mode (online or offline), press the / buttons repeatedly to adjust the display brightness.
You can adjust the brightness in thirty-two steps (sixteen left and sixteen right).
The brightness changes one step for every press of the button or button.
4.2.3 Adjusting the Buzzer Volume
In normal mode (online or offline), press the button repeatedly to adjust the volume of the buzzer.
1 When the printer is in online or offline mode, press the button to show the current
buzzer volume of the printer.
The buzzer volume icon is shown on the top right corner of the screen.
2 Pressing the button will cycle through the volume level and the buzzer will beep
according to the volume.
button
button
button button
button
This illustration shows the screen images of
the volume adjustment in offline mode.