SATO s84ex - Page 299

8 Appendix
297
S84-ex/S86-ex Operator Manual
SET CALENDAR NO - -
CALENDAR 11/01/01 00:00 No Yes
CALENDAR INPUT 11/01/01 00:00 No Yes
CALENDAR DAY OF WEEK CODE SUNDAY 1
MONDAY 2
TUESDAY 3
WEDNESDAY 4
THURSDAY 5
FRIDAY 6
SATURDAY 7
No Yes
CALENDAR MONTH CODE JANUARY A
FEBRUARY B
MARCH C
APRIL D
MAY E
JUNE F
JULY G
AUGUST H
SEPTEMBER J
OCTOBER K
NOVEMBER L
DECEMBER M
No Yes
CALENDAR CASE FORMAT MIXED No Yes
CALENDAR CHECK DISABLE Yes Yes
CHARACTER PITCH PROPORTIONAL Yes Yes
PROTOCOL CODE STANDARD Yes Yes
NON STANDARD CODE SETTING STX=7Bh, ETX=7Dh, ESC=5Eh,
ENQ=40h, CAN=21h, NULL=7Eh,
OFFLINE=5Dh
Yes with Default
(ALT. PROTOCOL)
RIBBON SAVER DISABLE Yes Yes
MODE SELECT SBPL Yes Yes
JOB MODIFICATION DISABLE No Yes
ROTATE LABEL DEG: 0 Yes Yes
LABEL SIZE ADJ WIDTH: S84-ex 8 dots/mm: 0832
12 dots/mm: 1248
24 dots/mm: 2496
S86-ex 8 dots/mm: 1340
12 dots/mm: 2010
Yes Yes
LABEL SIZE ADJ HEIGHT: S84-ex 8 dots/mm: 20000
12 dots/mm: 18000
24 dots/mm: 9600
S86-ex 8 dots/mm: 9992
12 dots/mm: 14988
No No
IGNORE A1 NO Yes Yes
Setting Item Initial Value
Default
(User)
Default
(Shipping)