8 Appendix
342
S84-ex/S86-ex Operator Manual
The types of errors to print are as follows:
Message Cause and Countermeasure
TAG NOT FOUND Cause Did not find the tag to print, or failed to read the tag.
Countermeasure Confirm the inlay operation and check the printer/antenna
configuration.
WRITE TAG ERROR Cause Failed to write the tag.
Countermeasure Confirm the inlay operation and check the printer/antenna
configuration.
VERIFY ERROR Cause The written value and the read value do not match.
Countermeasure Confirm the inlay operation and check the printer/antenna
configuration.
LOCKING ERROR Cause Failed to lock the tag.
Countermeasure Check the media.
MULTI TAGS ERROR Cause Multiple tags captured at a time.
Countermeasure Confirm the inlay operation and check the printer/antenna
configuration.
CHIP MAKER ERR. Cause Specified tag chip manufacturer is not correct when
specifying in MCS setting and encoding SGTIN96.
Countermeasure Check the media, and correct the tag chip manufacturer.
MCS NOT SUPPORT Cause Unsupported inlay (IC chip) is used when specifying the MCS
setting and encoding SGTIN96.
Countermeasure Check the media, and change it with supported inlay.
READ ONLY ERROR Cause Succeeded to read but failed to write the tag.
Countermeasure Confirm the inlay operation and check the printer/antenna
configuration.
To Next Page
Loading...
