SATO s84ex - Page 66

4 Operation and Configuration
64
S84-ex/S86-ex Operator Manual
ENTER SHIFT TIME
Set the printer start time in 24-hour format.
Press the
/ buttons to shift the cursor and press the / buttons to
change the value.
Press the ENTER button to save the value and proceed to the next
setting screen.
HOW MANY CHR?
Set the character size of the SHIFT NAME by specifying the number of
characters.
Select the number of characters using the
/ buttons and then press
the ENTER button.
The setting range is from 01 to 16.
ENTER SHIFT NAME
Specify a name for the work shift.
Available characters are A to Z, space and 0 to 9.
The number of characters you can enter depends on the character size set
in the HOW MANY CHR? screen.
Press the
/ buttons to shift the cursor and press the / buttons to
set the character.
Press the ENTER button to save the work shift name.