1. UV SHADING
2. MR SHADING
3. IR SHADING (WHITE)
4. IR SHADING (DARK)
What is Shading?
Shading is to make a full swing reference waveform to read the full level of a signal. If the
machine rejects too many notes in Mixed Mode or in CF Detection Mode, the system
might not analyze the input of waveform. It is possible to make a standard waveform for
the system. For more detail information
9 Shading
There are 4 kind of shading as the above image. .
UV SHADING, MR SHADING, IR SHADING (WHITE), IR SHADING (DARK)
1. Load default parameter. (Press : 9(menu) → 7→ 1 → C(Clear)
2. Clean UV, MR, IR Sensor (Transmit and Receive)
< Display of SHADING MENU >
The below steps are necessary before doing shading.
To Next Page
Loading...
