Scania DC09 User Manual

Engine data plate
OPM 100 en-GB 25
© Scania CV AB 2023, Sweden
Engine data plate
The engine data plate indicates, in the form of a
code, the engine type, its size and applications. It
also indicates the engine type power range and
the nominal engine speed. The engine’s EU type
approval for exhaust emissions is indicated un-
der Output, where applicable.
The engine power is stated on a plate which is lo-
cated on the engine control unit. The engine seri-
al number is stamped onto the top of the cylinder
block at the front right.
Example: DC09 085A
DC Turbocharged diesel engine with air-
cooled charge air cooler.
09 Displacement in whole dm
3
.
085 Performance and certification code. The
code indicates, together with the applica-
tion code, the normal gross engine output.
A Code for application. A means for general
industrial use.
Example of an engine data plate.

Scania DC09 Specifications

General

Engine Model	DC09
Displacement	9.3 liters
Fuel Type	Diesel
Fuel System	Common rail
Bore x Stroke	130 mm x 140 mm
Engine Type	Inline 5-cylinder
Power Output	280-360 hp
Torque Output	1350-1700 Nm
Emission Control	SCR, EGR, DPF
Turbocharger	Variable geometry turbocharger
Cooling System	Liquid-cooled
Compression Ratio	18:1