OPM 100 en-GB 45
© Scania CV AB 2023, Sweden
Maintenance
Engines with few hours of op-
eration
On engines with few hours of operation, mainte-
nance must be carried out annually or every 5
years.
Stand-by generator sets and similar items that are
not used regularly should be test run and checked
in accordance with the manufacturer’s instruc-
tions.
The following maintenance items must be car-
ried out once the engine has been warmed up to
operating temperature.
1. Checking the oil level.
2. Checking the coolant level.
3. Checking the vacuum indicator.
4. Checking the fuel level.
5. Checking for engine leakage.
To Next Page
Loading...
