OPM 100 en-GB 38
© Scania CV AB 2023, Sweden
Starting and driving
Warning lamp Description
Constant light The particulate filter is starting
to become full. Increase the
load to improve automatic re-
generation or regenerate the
particulate filter manually.
Flashes slowly
(½ Hz)
Carry out manual regeneration
as soon as possible.
Flashes rapidly
(2 Hz)
Yellow warning. The particu-
late filter is overfull (130-
160% soot particles). Power is
reduced to 70%. Manual re-
generation cannot be carried
out. Book a mechanic to clean
the filter.
Flashes rapidly
(2 Hz)
Red warning. More than 160%
soot particles. Can no longer
regenerate with SDP3, Torque
reduction remains as above.
Stop the machine and renew
the particulate filter.
To Next Page
Loading...
