Maintenance
OPM 100 en-GB 47
© Scania CV AB 2023, Sweden
Oil change interval EU Stage V/China
IV
Table of oil change intervals for engines that
comply with EU Stage V/China IV. A 500-hour
service interval applies for other engines.
The table does not apply for engines that:
• occasionally have much higher consumption
• have an idling percentage > 15%
• are used at high coolant temperatures
For operation at extremely low outdoor tempera-
tures: Consult your nearest Scania workshop on
how to avoid starting difficulties.
If the engine is used in areas of the world where
engine oil with ACEA or API classification is
not available, the oil grade must be measured in
actual operation. In this case contact the nearest
Scania workshop.
Oil Oil change interval
Medium load (l/h)
< 32 < 36 > 36
LDF-4 750 h 500 h 500 h
Other 500 h 500 h 400 h
To Next Page
Loading...
