Lubrication system
OPM 100 en-GB 51
© Scania CV AB 2023, Sweden
Filled engine oil grade label
When changing oil it is important to use the cor-
rect engine oil grade. The oil filler cap must be
clearly marked with a label showing the filled oil
grade. However, there are only labels for oils
from Scania and oil grade ACEA E9.
Stick on a new label if the oil type or oil grade is
changed in favour of any of the oil types above.
Replace the label if it is missing.
If the oil grades below are used, it is possible to
order labels for the oil filler cap from Scania.
Oil grade Colour Part no. Part no.
Filling in the cylinder block Filling in the rocker cover
Scania LDF-4 Blue 2 602 886
Scania LDF-4 Yellow 2 602 885
Scania LDF-3 Red 2 132 426 2 427 133
Scania LDF-2 Blue 2 132 424 -
Scania LDF Grey 2 269 345 -
ACEA E9 - 2 132 429
Oil filler label in the cylinder block.
Oil filler label in rocker cover.
To Next Page
Loading...
