Scania PDE User Manual

OPM 250 en-GB 14
©
Scania CV AB 2016, Sweden
Environment and safety
Lubrication system
WARNING!
Hot oil can cause burns and skin irritation. Wear
protective gloves and goggles when changing
hot oil.
Make sure that there is no pressure in the lubri-
cation system before starting work on it.
The oil filler cap must always be in place when
starting and running the engine to prevent oil be-
ing ejected.
Environment
Always hand in used oil to an authorised waste
disposal contractor.
Cooling system
WARNING!
Never open the coolant filler cap when the en-
gine is hot. Hot coolant and steam may spray out
and cause burns.
If the cap has to be opened do it slowly and care-
fully to release the pressure before removing the
cap. Wear gloves as the coolant is still very hot.
Environment
Always hand in used coolant to an authorised
waste disposal contractor.

Scania PDE Specifications

General

Brand	Scania
Model	PDE
Category	Engine
Language	English