Scania PDE User Manual

OPM 250 en-GB 47
©
Scania CV AB 2016, Sweden
Cooling system
Antifreeze and corrosion in-
hibitor
Only the product Scania coolant, or other prod-
ucts that are tested to provide proper antifreeze
and protection against corrosion for Scania, may
be used in Scania engines. Products that do not
satisfy the requirements for use in a Scania en-
gine can result in faults in and damage to the
cooling system. This can lead to the invalidation
of Scania's warranty for faults and damage
caused by the use of inappropriate coolant.
The antifreeze and corrosion inhibitor used in
Scania engines should be of the ethylene glycol
type.
Scania concentrate
Designation Contents Part No. Volume Volume (US
gallons)
Coolant Antifreeze and corrosion inhibitor (concentrate) 1 894 323 5 l 1.3 gallons
Coolant Antifreeze and corrosion inhibitor (concentrate) 1 894 324 20 l 5.3 gallons
Coolant Antifreeze and corrosion inhibitor (concentrate) 1 894 325 210 l 55 gallons
Coolant Antifreeze and corrosion inhibitor (concentrate) 1 894 326 1,000 l 264 gallons
Scania Ready Mix
Designation Contents Part No. Volume Volume (US
gallons)
Coolant Scania antifreeze and corrosion inhibitor Ready Mix
50/50
1 921 955 5 l 1.3 gallons
Coolant Scania antifreeze and corrosion inhibitor Ready Mix
50/50
1 921 956 20 l 5.3 gallons
Coolant Scania antifreeze and corrosion inhibitor Ready Mix
50/50
1 921 957 210 l 55 gallons
Coolant Scania antifreeze and corrosion inhibitor Ready Mix
50/50
1 896 695 1,000 l 264 gallons

Scania PDE Specifications

General

Brand	Scania
Model	PDE
Category	Engine
Language	English