Scania PDE User Manual

OPM 250 en-GB 77
©
Scania CV AB 2016, Sweden
Technical data
Injection system
Cooling system
Intake system
Electrical system
Type PDE (unit injector)
Control system EMS
Fuel filter Paper filter from Scania
Fuel filter with water separator Paper filter from Scania
Coolant volume, excluding radiator (dm
3
/US gallons)
With heat exchanger 40/10.6
With keel cooling, 1 coolant circuit 24/6.3
With keel cooling, 2 coolant circuits 20/5.3
Without heat exchanger and liquid-cooled charge air cooler 20/5.3
Coolant temperature (°C/°F)
With heat exchanger 90-95/194-203
With keel cooling 83-88/181-190
Without heat exchanger and liquid-cooled charge air cooler 83-88/181-190
Number of thermostats 1
Thermostat opening temperature (°C/°F)
With heat exchanger 80/176 and 87/187
With keel cooling 75/167
Without heat exchanger and liquid-cooled charge air cooler 75/167
Permissible pressure drop in the intake system with cleaned or new fil-
ter (mbar)
30
Permissible pressure drop in the intake system with blocked (dirty) fil-
ter (mbar)
65
Type 2-pin, 24 V, DC
Starter motor, standard equipment 2-pin, 24 V, 7.0 kW
Alternator, standard equipment 2-pin, 28 V, 100 A

Scania PDE Specifications

General

Brand	Scania
Model	PDE
Category	Engine
Language	English