OPM 250 en-GB 26
©
Scania CV AB 2016, Sweden
Inspection
Inspection
The inspection programme covers a number of
points that are divided into the following sec-
tions:
• Lubrication system
• Cooling system
• Air cleaner
• Miscellaneous
Block the starting device when working on the
engine. If the engine starts unexpectedly, there is
a serious risk of injury.
The inspection programme includes the follow-
ing inspections:
• S inspection: Minimum basic inspection.
• M inspection: More extensive inspection.
• L inspection: Includes nearly all inspection
points.
• XL inspection: Includes all inspection points.
During a period, the sequence is S-M-S-L-S-M-
S-L-S-M-S-XL.
To Next Page
Loading...
