Need help?Do you have a question about the Scanlab RTC 4 and is the answer not in the manual?
General| Brand | Scanlab |
|---|---|
| Model | RTC 4 |
| Category | Recording Equipment |
| Language | English |
Details the items included in the product package.
Provides contact information and address of the manufacturer, SCANLAB AG.
Explains the manual's purpose, scope, and references to software/firmware versions.
Describes the purpose and application scope of the RTC4 PC Interface Board.
Outlines the necessary hardware and software specifications for the RTC4.
Details the physical dimensions and component layout of the RTC4 board.
Highlights hardware and software differences and provides tips for RTC3 users.
Provides essential precautions and guidelines for safe handling and operation of the RTC4.
Emphasizes adherence to laser safety directives and responsible system safety.
Explains the software architecture and command structure of the RTC4.
Details commands for controlling scan heads and lasers, including vector and arc commands.
Describes various delay settings for synchronizing scan head and laser control signals.
Defines the reference system and coordinate system for the image field.
Explains how the RTC4 compensates for field distortions using a correction algorithm.
Covers different laser control modes and signal parameters for various laser types.
Details methods for monitoring system status and performing diagnostics.
Explains enhanced functionalities and protocols for intelliSCAN4 systems.
Describes how to transform output coordinates using matrices and offsets for scaling, rotation, etc.
Explains the wobbel function for varying line width during laser marking.
Details how to manage and apply two distinct correction files for scan head configurations.
Covers methods for controlling multiple RTC4 boards simultaneously in a PC.
Explains the circular queue mode for continuous command data transfer.
Introduces commands for controlling program flow and enabling structured list programming.
Describes how to reproduce raster images and bitmaps using the RTC4.
Explains commands that specify jump/mark durations for precise timing applications.
Details the automatic self-calibration feature for compensating scanner drift.
Provides pin-out details for the 9-pin D-SUB laser connector and laser signals.
Details the 26-pin connector for the 8-bit digital output port and laser signals.
Describes the 25-pin connector for scan head communication and control signals.
Explains the 26-pin connector for optional second scan head connection.
Specifies requirements and layout for the data cable connecting scan head to RTC4.
Details the optional optical data interface for interference-free data transmission.
Describes the connector for 16-bit digital input/output and BUSY status.
Details an optional board providing additional digital and analog I/O capabilities.
Enables simultaneous control of two scan heads in a double scan head configuration.
Provides optional on-board signal inputs/outputs for real-time processing applications.
Describes the use of the third data channel for controlling a third axis in 3-axis systems.
Enables data transmission via a polymer optical fiber for improved signal integrity.
Allows optical decoupling of digital laser control signals from PC ground.
Lists available jumpers on the RTC4 board and their functions.
Provides instructions for modifying jumper settings for laser signals and output ports.
Details the step-by-step procedure for physically installing the RTC4 board into a PC.
Explains how to install the necessary software drivers for the RTC4.
Guides through the initial system start-up and basic functionality testing.
Describes the procedure for installing the RTC4 application-support DLL and associated files.
Explains how to import and use the RTC4 DLL functions in different programming languages.
Outlines the essential steps required to initialize the RTC4 for application use.
Introduces sample programs demonstrating RTC4 control and list commands.
Provides a general overview of the RTC4 command set and its organization.
Details commands for loading correction files and configuring laser/scanner modes.
Covers essential commands for scan head movement, marking, and pixel output.
Explains commands for structured programming, list handling, and coordinate transformations.
Details commands for monitoring system status and managing input/output ports.
Outlines procedures and conditions for servicing and repairing the RTC4.
Details SCANLAB's warranty terms, coverage, and limitations for the product.
Provides contact details for service, repairs, advice, and information from SCANLAB.
Explains the procedure for proper disposal of the RTC4 unit.
To Next Page
