www.schaerer.com Operation
BASCAP_TOUCHIT_EN
V04 | 10.2018
40
► Unlock bean hopper cover and unlatch using knob.
► Fill with coffee beans (max. 1,000 g).
► Replace cover. Twist knob to latch and use key to lock.
Water
Option 1: Mains water supply
CAUTION!
Risk of machine
damage!
The machine can suffer damage if the pump runs dry.
Before switching on the machine, make sure that the stop valve of the water supply is
open.
► Open the stop valve on the main water valve.
Option 2: Mains water supply
► Remove the cover on the drinking water tank.
► Remove the drinking water tank daily and rinse out thoroughly with fresh water.
► Fill the drinking water tank with fresh drinking water before using it.
► Reinsert the drinking water tank.
► Reattach the cover.
Milk
Option 1: Milk Smart Cooler
► Open the door.
► Remove and rinse the milk container.
► Pour in fresh, pre-cooled milk (3 – 5°C).
► Place the milk container into the cooling unit.
► Hang the hoses into the container.
The hose end must be in contact with the container floor.
► Close the door.
Option 2: Side cooling unit
► Open the door.
► Remove and rinse the milk container.
► Pour in fresh, pre-cooled milk (3 – 5°C).
► Place the milk container into the cooling unit.
► Hang the hose or hoses into the container.
The hose end must be in contact with the container floor.
► Close the door.
Option 3: Cup & Cool
For reasons relating to insurance law, it is advisable that the stop valve of the water supply be
closed at the end of the day.
Ensure that the filled milk does not touch the closed milk container lid.
To Next Page
Loading...
Need help?
General
