www.schaerer.com Programming
BASCAP_TOUCHIT_EN
V04 | 10.2018
64
Entering the programming level
The programming level requires a CHEF (or SERVICE) card.
► Start machine.
► Insert the CHEF card into the card reader.
The CHEF card menu opens.
► Configure settings and save.
► Remove CHEF card.
The machine is restarted.
If the service technician activates the CHEF card, the following menu items are available:
• TouchIT configuration
• Counters and statistics
• Beverage settings
• System settings
• Automatic timer
• Flavour pump in operation
• Cleaning instructions
• Screen design
TouchIT configuration
The "TouchIT configuration" menu contains the following items:
• Calibrate Touch Screen
• Language
• Beverage button symbols
• Logo
• Cleaning PIN
• Service PIN
• Timeout for pre-selection (standard beverage tab)
• Screensaver timeout
• Image selection for screensaver
• External buttons
• Name, flavour pump 1-4
• Symbol, flavour pump 1-4
Inactive parameters are only accessible with the SERVICE card.
The contents of these menu items are described in this section.
Any changes made become active after: 1) the save button has been pressed, 2) the CHEF
card has been removed, and 3) the software has been automatically reloaded (during start-
up).