www.schaerer.com Programming
BASCAP_TOUCHIT_EN
V04 | 10.2018
74
Milk settings
Milk foam settings
Parameters: Milk settings
Display text Description Setting range Notes
401) Cold milk dispensing time Used for "milk layering" in latte macchiatos.
However, cold milk can also be added to
cappuccino and milk coffee to create special
recipes.
► Enter the dispensing time in the field.
Cold milk is added to the beverage for
the set time.
0-40.0 sec The standard setting is
[2.0 sec].
The "Cold milk foam" or
"Milk pump" fresh milk sy-
stem is selected in the sy-
stem parameters.
The "Milk Smart" system
parameter does not sup-
port this function.
402) Hot milk dispensing time Sets the dispensing time for hot milk. 0-40.0 sec The standard setting is
[7.5 sec].
A fresh milk system must
be selected in the system
parameters.
406) Waiting time milk Waiting time between hot milk and the next
component of the beverage.
0-15 sec The standard setting is
[0 sec].
A fresh milk system is
selected in the system
parameters.
Parameters: Foam settings
Display text Description Setting range Notes
501) Milk foam dispensing time Dispensing duration of foam.
► Enter the desired milk foam dispensing
time.
Foam is added to the beverage for
the set time.
0-40.0 sec The standard setting is
[4.5 sec].
A fresh milk system is
selected in the system
parameters.
506) Foam waiting time Waiting time between when foam is dispen-
sed and the next component of the bevera-
ge.
0-20 sec A fresh milk system is
selected in the system
parameters.
To Next Page
Loading...
Need help?
General
