www.schaerer.com Operation
BASCAP_TOUCHIT_EN
V04 | 10.2018
44
► Place a cup under the hot water outlet.
► Press the [Hot water] button or press it and keep it held down.
► Remove the cup after the beverage has been dispensed.
There is a risk of burns at the hot water outlet during hot water dispensing.
Do not touch the hot water outlet.
Milk beverages
► Place a cup under the beverage outlet.
► Press the desired beverage button.
► Remove the cup after the beverage has been dispensed.
Steam
Option: Powersteam (single steam outlet)
► Place the cup/container beneath the steam wand.
The tip of the steam wand must be completely under the surface of the milk.
► Press the [Steam] button.
► After steam dispensing is finished, remove the cup/container.
► Clean the outside of the steam wand with a moist paper towel.
► Point steam wand at drip grid and briefly press the [Steam] button.
Milk and beverage residues are flushed out of the steam wand.
Option: Autosteam (monitored temperature)
► Place the cup/container beneath the steam wand.
The tip of the steam wand must be completely under the surface of the milk.
► Press the [Steam] button.
► Aerate the milk by injecting steam beneath the surface.
The milk is heated from 5 °C to 37 °C.
► Dense milk foam is created by injecting steam on the bottom third of the milk height, rolling
and turning clockwise.
The milk is heated from 37 °C to 65 °C.
► After steam dispensing is finished, remove the cup/container.
► Clean the outside of the steam wand with a moist paper towel.
► Point steam wand at drip grid and briefly press the [Steam] button.
Milk and beverage residues are flushed out of the steam wand.
Milchtemperatur in °C Celsius
Milchvolumen
To Next Page
Loading...
Need help?
General
