BASCAP_TOUCHIT_EN
V04 | 10.2018
77
www.schaerer.comProgramming
Hot water settings
Cup heater settings
Steam settings
Hot water settings parameter
Display text Description Setting range Notes
201) Water quantity Sets the dispensing time for the hot water
quantity.
1-99 sec "System parameter" - "Hot
water" is activated.
The dispensing options
are described in the
"Configuration" -
"Beverage settings" -
"Common settings" -
"Dispensing mode" pa-
rameter.
Cup warmer settings parameter
Display text Description Setting range Notes
901) Max. heating time Sets the dispensing time of steam for the cup
warmer.
1-99 sec The "Steam cup heater"
system parameter is acti-
ve.
The dispensing options
are described in the
"Configuration" -
"Beverage settings" -
"Common settings" -
"Dispensing mode" pa-
rameter.
Parameters: Steam settings
Display text Description Setting range Notes
702) Dosing time Steam dispensing duration setting 01-99.9 sec Standard value is
[90.0 sec].
A steam system is
selected in the "Steam out-
let" system parameter.
The dispensing options
are described in the
"Configuration" -
"Beverage settings" -
"Common settings" - "108)
Dispensing mode" param-
eter.