Schaerer Siena 1 - Installing the Milk Nozzle (Siena 2); Adjusting Milk Foam (Siena 2)

Commissioning
User manual SI 2 - EN 57
Version 02 / 06.2005 / REWE www.schaerer.com
Installing the milk nozzle (Siena 2)
You have received eight different milk nozzles
(refer to "Overview of accessories", page 54). They feature different
dispensing diameters (diam.).
1. Insert the milk nozzle into the milk tube as far as it will go (refer to the
picture).
Without the milk nozzle, the milk tube can become stuck to the bottom of
the container.
Adjusting milk foam (Siena 2)
Milk foam too cold = fit a smaller diameter
(milk nozzle).
Milk foam too hot = fit a larger diameter
(milk nozzle).