Schaerer Siena 1 - Default Settings: Products

Programming
User manual SI 2 - EN 69
Version 02 / 06.2005 / REWE www.schaerer.com
Base config.
Ready
The parameters can only be changed by a qualified service technician
(protected by PIN code)!
Proceed by pressing
M
.
End of fixed parameter programming.
Default settings: products
Here you will find all default settings for product programming.
Water volume:
Espresso: 50 ml
Coffee: 140 ml
Cappuccino: 40 ml
Coffee quantity (grinding time):
5.80 seconds
Pre-brewing:
Pre-brewing is ON
During pre-brewing, the coffee powder is moistened with water before
brewing.
Siena 2 only:
Milk foam delivery time (sec.):
14.00 seconds
Order of dispensing:
Milk → Coffee
Milk foam quantity (sec.):
14.00 seconds
Hot water volume (sec.):
14.00 seconds