Schaerer Siena 1 - Overview: Programming Fixed Parameters

Programming
68 User manual SI 2 - EN
www.schaerer.com Version 02 / 06.2005 / REWE
M
Overview: programming fixed parameters
Accessing the programming level:
Press
M
to access the programming level.
Programming fixed parameters:
Set each digit using
or
.
Confirm by pressing
M
.
Set counter level to 0 using
(if desired).
Confirm by pressing
M
.
Block individual buttons from use by pressing
or
.
Confirm by pressing
M
.
Grant authorisation to decalcify using
or
.
Confirm by pressing
M
.
Grant authorisation for product programming using
or
.
Confirm by pressing
M
.
Grant authorisation for system programming using
or
.
Confirm by pressing
M
.
Switch the counter display of the product buttons on or off using
or
.
Confirm by pressing
M
.
Set water hardness using
or .
Confirm by pressing
M
.
With coin tester option only:
Set the product button price using
or .
Confirm for each button by pressing
M
.
With coin tester option only:
Switch accounting on or off using
or .
Confirm by pressing
M
.
Set the authorisation code (each digit) using
or .
Confirm by pressing
M
.
The machine can be reset to default settings by pressing .
Confirm by pressing
/ cancel by pressing
M
.
Press the
button
Ready
Product, 2x, C
Code ####
Counter status
Lock button
Descaling ON
Prog.prod. EIN
Sys.prog. EIN
Counter EIN
16 ° - 20 ° dH
Change price
Acc. syst. AUS
Change code
Factory set.
Continued on page 69.