Schaerer Siena 1 - Installing;Detaching the Foam Head (Siena 2); Cleaning the Milk Nozzle (Siena 2)

Cleaning
User manual SI 2 - EN 75
Version 02 / 06.2005 / REWE www.schaerer.com
7
Cleaning the milk nozzle (Siena 2)
Installing/detaching the foam head (Siena 2)
1
2
4
5
6
• Press the front of the foam head.
• Remove the foam head by pulling it
downwards.
• Remove the milk tube and tube
connector.
• Swing the foam chamber (with
outlet pipe) away from the outlet
beaker (refer to the picture).
• Remove the foam chamber by
pulling it upwards.
• Unscrew and remove the outlet
pipe.
• Clean all parts under running water.
• Re-attach the parts in reverse order.
• Insert a brush into the milk nozzle.
<< Stand by >>
• Re-assemble the outlet.
• Re-place the grounds container.
• Descaling process is finished.
On the display appears: