Operation
62 User manual SI 2 - EN
www.schaerer.com Version 02 / 06.2005 / REWE
Preparing cappuccino (Siena 2)
All beverages dispensed from the machine are hot!
The dispensing procedure for cappuccino cannot be interrupted.
1. Move the milk tube with the milk nozzle downwards into the milk
container (refer to the picture).
2. Place a cup under the outlet.
3. Touch the cappuccino button. The product is dispensed.
To prepare macchiato, follow the same instructions as for
preparing cappuccino. The only difference is that milk is poured
into the cup before the dispensing procedure and the time-out
between the dispensing of milk and coffee is longer.
Preparing milk foam (Siena 1)
All beverages dispensed from the machine are hot!
Milk foam can be dispensed and/or added at any time.
1. Unscrew the screw [ 1 ].
2. Fit the foam nozzle to the steam outlet.
Retighten the screw [ 1 ].
3. Place a cup under the steam outlet.
3. Keep the foam nozzle inside the cup.
Turn the rotary dial (on the right-hand side) to the [ Steam ] position.
4. To cancel the dispensing procedure, turn the rotary dial back to its
starting position (centre).
5. Remove the cup from under the steam outlet.
After dispensing milk foam, dispense some steam for a short
period in order to clean the foam nozzle and the outlet of milk
remains.
6. After dispensing foam, clean the foam nozzle under warm, running
water.
1
To Next Page
Loading...
Need help?
General
