Programming
User manual SI 2 - EN 65
Version 02 / 06.2005 / REWE www.schaerer.com
Overview: product programming
Accessing the programming level:
Press
M
to access the programming level.
Product programming (Siena 1 / 2)
Set the water volume (ml) using
or .
Confirm by pressing
M
.
Set the coffee quantity (grinding time) using
or .
Confirm by pressing
M
.
Switch pre-brewing on or off using
or .
Confirm by pressing
M
.
End of product programming.
Product programming (Siena 2)
Set the water volume (ml) using
or .
Confirm by pressing
M
.
Set the coffee quantity (grinding time) using or
.
Confirm by pressing
M
.
Switch pre-brewing on or off using
or .
Confirm by pressing
M
.
Set the milk volume (sec.) using
or .
Confirm by pressing
M
.
Change the dispensing order using
or .
Confirm by pressing
M
.
End of product programming.
Ready
Product, 2x, C
M
+ 0% ##
+ 0% #.## s
Pre-brewing EIN
Ready
+ 0% ##
+ 0% #.## s
Pre-brewing EIN
+ 0% #.## s
Milk → Coffee
Ready
Press button
[ 3 ]
(refer to page 64)
Press button [ 1 ]
or [ 2 ]
(refer to page 64)
Continued on page 66.