Safety notes
User manual SI 2 - EN 51
Version 02 / 06.2005 / REWE www.schaerer.com
Do not leave the device switched on if unattended. For reasons of safety
and power efficiency, we recommend switching the device off at the main
power switch over night and during longer periods of non-use (not possible
with the coin tester option). For shorter periods of non-use, the device can
be switched to Stand-by mode via the button. For devices with a
fixed water supply, the tap must be closed.
Disconnect the power cord if the device shall not be used for a longer
period of time.
Never expose the device to outside weather conditions such as rain, snow,
frost, etc.
Do not operate the device without water.
The coffee maker's original packaging has been designed to be especially
robust for postal transport. Therefore, be sure to keep this packaging in a
safe place should a return delivery be necessary.
For safety reasons, machines that have reached the end of their product
life cycles must be rendered unusable. To do so, disconnect the power
cord and sever the connector cable. Afterward, dispose of the device in
accordance with regulations.
Old devices still contain valuable materials. Instead of taking your old
device to the nearest refuse dump, you should therefore ask your service
technician or city administration office what recycling options are
available. In any case, make sure that the device is not thrown into the bin
for household rubbish.
The device is designed for preparing coffee, hot water and steam and
may not be operated for any other purpose. The coffee maker is suitable
for household and industrial use. If it is used for industrial purposes, the
warranty claims are different.
Please observe the warranty conditions.
Devices with a damaged connector cable or plug, or devices which
are damaged in any way or not functioning optimally, may not be
commissioned. In the event of damage, the device may only be opened
by authorised service technicians and repaired using original spare parts or
accessory parts. This also applies to instances in which the connector cable
is faulty. Otherwise, the manufacturer accepts no liability whatsoever. The
use of accessory parts not recommended by the device manufacturer can
lead to fire, electrical shock or personal injury.
To Next Page
Loading...
Need help?
General
