5 Cleaning
5.2 Cleaning the Cuff and Pouch
Page 52
BR-102 plus / BR-102 plus PWA
Art. no.: 2.511076 Rev.: g
5.2.5 Admissible Disinfectants for the Casing
• 50 % isopropyl alcohol
• Propanol (50 %)
• Ethyl hexanal
• Aldehyde (2-4%)
• Ethanol (50%)
• All products that are suitable for ABS plastic
5.2.6 Non-admissible disinfectants
Never use products containing the following:
• Organic solvents
• Ammonia-based detergent
• Abrasive cleaning agents
• 100% alcohol, Virex, Sani-Master
• Sani-Cloth®, Ascepti® or Clorox® wipes
•HB Quat®
• Conventional cleaner (e.g. Fantastic®, Tilex® etc.)
• Conductive solution
• Solutions or products containing the following ingredients:
– Ketone (for ex. acetone)
– Ammonium chloride
– Betadine
– Chlorine, wax or wax compound
– Sodium salt
5.2.7 Sterilisation
The cuff can be sterilised with Ethylene oxide gas. Prepare the cuff as
detailed previously. After sterilisation the parts that were exposed to
the gas must be aired.
All relevant regulations and safety precautions must be complied
with.
To Next Page
Loading...
