Schluter Systems DH E RT2/BW - Open Window

PAGE 46
© 2022. All rights reserved. Used under license by Schlüter-Systems KG.
Open Window
This option allows you to enable the “Open Window” function.
The thermostat can detect an open window by registering a rapid drop in
temperature.
With the function enabled, the thermostat shuts o the heating for 30 minutes if an
open window is detected.
1. Tap the “Menu” button on the home screen.
2. Scroll down and tap the “Engineer Settings” button.
3. Tap the “Open Window” button.
4. Tap the “OFF/ON” button to the setting you prefer and confirm with the “√”
button.
5. The thermostat will automatically return to “Engineer Settings”.
If an open window is detected, the “Open Window” screen will appear, allowing the
function to be cancelled by tapping “X”.
Open Window
Open WindowMon 11:15
17:00
23.5
°
Manual Other...
1
Mon 11:15
17:00
23.5
°
Manual Other...
1
Heating Schedule
Energy Use
User Settings
Engineer Settings
Heating Schedule
Energy Use
User Settings
Engineer Settings
2
Sensor Application
Adaptive Function
Open Window
Factory Reset
Temp. Scale
Room Sens. Calibr.
Floor Sens. Calibr.
Sensor Type
Sensor Application
Adaptive Function
Open Window
Factory Reset
Temp. Scale
Room Sens. Calibr.
Floor Sens. Calibr.
Sensor Type
3
Open Window
ON
4
>
<
Contents