Schluter Systems DH E RT2/BW - WiFi Connection* 2;4

PAGE 58
© 2022. All rights reserved. Used under license by Schlüter-Systems KG.
Manual connection:
The “Searching networks” screen is displayed while the thermostat is searching for
available networks. The detected networks are then displayed in a list.
7. Tap the name of the desired network on the list.
If you cannot see the name of your network on the list, you have to enter the
network name manually in the following way:
• Tap “Other” at the bottom of the list of networks.
• You are now asked to enter the network name (SSID). Tap the “Right Arrow”
button to proceed.
• Enter the network name (SSID) for your wireless network at the top of the
screen.
• Confirm the network name with “√”
See tips on using the keyboard in step 9 below.
8. You are now asked to enter the network key (password). Tap the “Right Arrow”
button to proceed.
9. At the top of the screen enter the network key (password) for your wireless
network.
WiFi Connection* 2/4
*
)
Only available for the DHERT6/BW Smart (WiFi & Voice Control) thermostat
>
<
Contents