Schluter Systems DH E RT2/BW - Smarthome connectivity Google* 2;2

PAGE 66
© 2022. All rights reserved. Used under license by Schlüter-Systems KG.
Smarthome connectivity Google* 2/2
Disconnecting the thermostat from your Google Home System:
1. Open the Google Home app on your smartphone/tablet.
2. Press the name/location of the thermostat you would like to disconnect
3. Press the settings symbol, upper right corner.
4. Press “Unlink Schlüter-HEAT-CONTROL”
5. Press “Unlink”
6. Press the Schlüter-HEAT-CONTROL app and press “unlink account”
7. Press “Unlink”
Your chosen thermostat is now disconnected from your Google Home System.
Voice commands:
When your thermostat(s) is (are) connected to your Google Home System, it (they)
can now be voice controlled, either together or individually. Read below for some
examples of voice commands:
Set exact temperature:
“Hey Google, set the *Living room* to 20 degrees”
“Hey Google, set *All thermostats* to 20 degrees”
Read out a temperature:
“Hey Google, what is the temperature in the *Oce*?”
“Hey Google, what is the temperature on *all thermostats*?”
Increase/decrease the temperature:
“Hey Google, increase/decrease the temperature in the *Bedroom* by 4 degrees”
“Hey Google, make the *Bedroom* warmer”
“Hey Google, increase/decrease the temperature on *all thermostats*”
*
)
Only available for the DHERT6/BW Smart (WiFi & Voice Control) thermostat
Contents
<
>