Schluter Systems DH E RT2/BW - WiFi Connection* 3;4

PAGE 59
© 2022. All rights reserved. Used under license by Schlüter-Systems KG.
Tips on using the keyboard:
• Tap the “Character set” button to the left to choose between dierent
character sets, e.g. lowercase letters, uppercase letters, numbers and special
characters.
• Tap the “Up Arrow” and “Down Arrow” buttons to scroll up and down in the
selected character set.
• Tap the highlighted character to enter it at the top.
• Tap the “Delete” button to the right to delete the last character.
• If the key is too long to be displayed in the text field, you can tap the text to
see the entire text. Tap it again to return to the keyboard.
10. Confirm the network key with “√” to start connecting the thermostat.
The thermostat will now attempt to connect to your wireless network. Please be
patient, since this may take a while (several minutes).
• If the connection is successful, a confirmation screen will be displayed briefly.
After that the “Status” screen will be displayed showing the current status of the
WiFi connection. Tap the “Left Arrow” button to return to the menu.
• If the connection fails, the thermostat will tell you so. In this case, check
troubleshooting, and then tap the “X” button to return to step 4 and try again.
WiFi Connection* 3/4
*
)
Only available for the DHERT6/BW Smart (WiFi & Voice Control) thermostat
>
<
Contents