Schluter Systems DH E RT2/BW - Startup Wizard 1;2

PAGE 5
© 2022. All rights reserved. Used under license by Schlüter-Systems KG.
Startup Wizard 1/2
When the system has been installed and turned on for the first time, or after you
have performed a factory reset, you must set Region, Language, Date, Time and
Floor Type.
The thermostat will automatically guide you through the process.
1. Region – set the time region in which the thermostat is located.
This parameter is used, for example, to ensure correct use of Daylight Saving
Time.
Tap the time region you are in.
Confirm with “√”
2. Language – set the language to be used on the thermostat display.
Tap the language you prefer. Confirm with “√”.
3. Date – set the current date.
Tap the parameter you want to change. Use the “Up Arrow” or “Down Arrow”
button to set the day, month and year.
Confirm each setting with “√”.
4. Time – set the current time.
Tap the parameter you want to change. Use the “Up Arrow” or “Down Arrow”
button to set the hours and minutes.
Confirm each setting with “√”.
Date
0201 2014
Date
0201 2014
Language 1
Language 2
Language 3
Region 1
Region 2
Region 3
>
<
Contents