SCHUNK JGP-P - Page 21

Assembly and settings
1. Check the evenness of the mounting surface, }5.2.1 [
/
22].
2. Connect the product via the hose-free direct connection.
3. OR: Connect compressed air lines to the main air
connections"A" and"B".
✓ Remove the locking screws.
✓ Screw in air connections (plug connections).
OR: Screw on throttle valve in order to be able to perform
sufficient throttling and/or damping.
4. Screw the product to the machine/system, }5.2.1 [
/
22].
✓ If necessary, use appropriate connection elements (adapter
plates).
✓ Observe permissible depth of engagement and if required
strength class.
5. Connect air purge connection if necessary.
6. Attach additional structure to the product if
necessary, }5.3 [
/
28]
7. Connect the sensor, see assembly and operating manual of the
sensor.
8. Mount the sensor, }5.4 [
/
30].
2102.00 | JGP-P | Assembly and Operating Manual | en | 1469637