SCHUNK JGP-P - Sizes; Variants; Warranty

General
6 02.00 | JGP-P | Assembly and Operating Manual | en | 1469637
1.1.3 Sizes
This operating manual applies to the following sizes:
• JGP-P 40
• JGP-P 50
• JGP-P 64
• JGP-P 80
• JGP-P 100
• JGP-P 125
• JGP-P 160
• JGP-P 200
• JGP-P 240
• JGP-P 300
1.1.4 Variants
This operating manual applies to the following variations:
• JGP-P stroke 1
• JGP-P stroke 2
• JGP-P with gripping force maintenance "O.D. gripping" (AS)
• JGP-P with gripping force maintenance "I.D. gripping" (IS)
1.2 Warranty
If the product is used as intended, the warranty is valid for 24
months from the ex-works delivery date under the following
conditions:
• Observe the ambient conditions and operating
conditions, }2.6 [
/
10]
• Observe the specified maintenance intervals, }7 [
/
49]
Parts touching the workpiece and wear parts are not included in
the warranty.
Designation JGP-P
40 50-160 200-240 300
Warranty duration
[months]
24 24 24 24
or maximum cycles [mil.] 20 15 10 5
* One cycle consists of a complete gripping process: "Open
gripper" (release workpiece) and "Close gripper" (grip workpiece).