SCHUNK JGP-P - Lubricants;Lubrication Points (Basic Lubrication); Lubricate Product

Maintenance
50 02.00 | JGP-P | Assembly and Operating Manual | en | 1469637
7.3 Lubricants/Lubrication points (basic lubrication)
WARNING
Risk of injury due to contact with lubricants!
Lubricant may cause irritation and allergic reactions if it contacts
the skin or eyes.
• Avoid contact between lubricant and skin or eyes.
• Wear safety goggles and protective gloves.
• Observe information on the safety data sheet of the lubricant.
SCHUNK recommends the lubricants listed.
During maintenance, treat all greased areas with lubricant. Thinly
apply lubricant with a lint-free cloth.
Lubricant point Lubricant
Metallic sliding surfaces JGP-P 40: microGLEIT GSV 790
JGP-P 50-300: Toothgood 1
All seals Sealgood 1
Cylinder surfaces Sealgood 1
7.4 Lubricate product
WARNING
Risk of injury due to moving parts!
When moving the gripper fingers, body parts may get squashed/
hit causing severe injuries.
• Do not interfere with moving parts during operation.
• Observe position and direction of movement of the gripper
fingers.