Assembly and settings
28 02.00 | JGP-P | Assembly and Operating Manual | en | 1469637
5.3 Attaching additional structure
Gripper with additional structure
1 Gripper 4 Centering sleeve
2 Additional structure 5 Gripper fingers
3 Workpiece
For supporting things like workpieces, an additional structure can
be attached to the gripper.
The locating surface of the additional structure may not exceed
the recess of the cover. The external dimensions of the additional
structure can exceed the external dimensions of the gripper but
not interfere with the operating cycle of the gripper fingers.
To Next Page
Loading...
