Table of contents
4
10.00 | SRU | Assembly and Operating Manual | en | 389439
5.2.2 Pneumatic connection............................................................................26
5.3 Settings............................................................................................................... 27
5.3.1 Adjustment of the end positions ............................................................27
5.3.2 Adjustment of the central position (Variant M) .....................................28
5.4 Installing the sensors.......................................................................................... 29
5.4.1 Overview of sensors ...............................................................................29
5.4.2 Mounting MMS 22 magnetic switch.......................................................30
5.4.3 Mounting MMS 22-PI1 programmable magnetic switch........................31
6 Commissioning .......................................................................................................32
6.1 Setting the speed................................................................................................ 32
6.2 Adjustment of the shock absorber stroke .......................................................... 34
6.2.1 Shock absorber stroke (variant H) ..........................................................35
6.2.2 Shock absorber stroke (variant S)...........................................................36
7 Troubleshooting .....................................................................................................37
7.1 Product does not move ...................................................................................... 37
7.2 Product does not travel through the entire stroke ............................................37
7.3 Product rotates jerkily ........................................................................................ 38
7.4 Torque diminishes? ............................................................................................ 38
8 Maintenance ..........................................................................................................39
8.1 Notes .................................................................................................................. 39
8.2 Maintenance interval ......................................................................................... 39
8.3 Lubricants/Lubrication points (basic lubrication) .............................................. 40
8.4 Disassembly and assembly ................................................................................. 40
8.4.1 Dismantle product ..................................................................................40
8.4.2 Notes for assembly .................................................................................41
8.4.3 Tightening torque for screws..................................................................41
8.4.4 Assembly drawing...................................................................................42
9 Translation of original declaration of incorporation ................................................45
10 Annex to Declaration of Incorporation....................................................................46
To Next Page
Loading...
