Basic safety notes
10 14.00 | SRU | Assembly and Operating Manual | en | 389439
l
Wear protective gloves to guard against sharp edges and
corners or rough surfaces.
l
Wear heat-resistant protective gloves when handling hot
surfaces.
l
Wear protective gloves and safety goggles when handling
hazardous substances.
l
Wear close-fitting protective clothing and also wear long hair
in a hairnet when dealing with moving components.
2.8 Notes on safe operation
Incorrect handling of the personnel
Incorrect handling and assembly may impair the product's safety
and cause serious injuries and considerable material damage.
l
Avoid any manner of working that may interfere with the
function and operational safety of the product.
l
Use the product as intended.
l
Observe the safety notes and assembly instructions.
l
Do not expose the product to any corrosive media. This does
not apply to products that are designed for special
environments.
l
Eliminate any malfunction immediately.
l
Observe the care and maintenance instructions.
l
Observe the current safety, accident prevention and
environmental protection regulations regarding the product's
application field.
To Next Page
Loading...
Need help?
General
