Assembly
14.00 | SRU | Assembly and Operating Manual | en | 389439 25
5.4 Installing the sensors
DANGER
Danger of explosion in potentially explosive areas!
l
Observe supplementary sheet for products with explosion-
resistant versions "SRU -...-EX".
NOTE
Observe the assembly and operating manual of the sensor for
mounting and connecting.
The product is prepared for the use of sensors.
l
For the exact type designations of suitable sensors, please see
catalog datasheet and }5.4.1 [/25].
l
For technical data for the suitable sensors, see assembly and
operating manual and catalog datasheet.
– The assembly and operating manual and catalog
datasheet are included in the scope of delivery for the
sensors and are available at schunk.com.
l
Information on handling sensors is available at schunk.com or
from SCHUNK contact persons.
5.4.1 Overview of sensors
Designation SRU
8 10 12 14
Magnetic switch MMS 22 X X X X
Programmable magnetic switch MMS 22-
PI1
X X X X
To Next Page
Loading...
Need help?
General
