Maintenance
36 14.00 | SRU | Assembly and Operating Manual | en | 389439
8.3 Lubricants/Lubrication points (basic lubrication)
During maintenance, treat all greased areas with lubricant.
Thinly apply lubricant with a lint-free cloth.
SCHUNK recommends the lubricants listed.
Lubricant point Lubricant
The teeth and the pinion Rivolta F.L.G. GT-2
All seals Rivolta F.L.G. GT-2
The product contains food-compliant lubricants as standard.
Components such as rolling bearings, linear guides, or shock
absorbers are not provided with food-compliant lubricants.
The requirements of standard EN1672-2:2020 are not fully met.
NOTE
l
Change contaminated food-compliant lubricant.
l
Observe information in the safety data sheet from the
lubricant manufacturer.
To Next Page
Loading...
