SCHUNK SRU - Tightening Torque for Screws; Assembly Drawing

Maintenance
38 14.00 | SRU | Assembly and Operating Manual | en | 389439
8.4.3 Tightening torque for screws
Position of the item numbers }8.4.4 [/38]
Item SRU
8 10 12 14
34 0.75 0.75 1.3 1.3
41 0.75 0.75 1.3 1.3
60 0.75 0.75 1.3 1.3
Tab.: Specified in Nm
8.4.4 Assembly drawing
The following figures are example images.
They serve for illustration and assignment of the spare parts.
Variations are possible depending on size and variant.
* Wearing part, replace during maintenance. Included in the
seal kit. Seal kit can only be ordered completely.
** only for SRU 8 and SRU 10