Assembly
14.00 | SRU | Assembly and Operating Manual | en | 389439 19
5 Assembly
5.1 Assembling and connecting
DANGER
Danger of explosion in potentially explosive areas!
l
Observe supplementary sheet for products with explosion-
resistant versions "SRU -...-EX".
WARNING
Risk of injury due to unexpected movements!
If the power supply is switched on or residual energy remains in
the system, components can move unexpectedly and cause
serious injuries.
l
Before starting any work on the product: Switch off the power
supply and secure against restarting.
l
Make sure, that no residual energy remains in the system.
CAUTION
Material damage due to faulty settings and assembly.
If the end position is approached too aprubtly, the product may
be damaged.
l
Ensure the turning / swiveling movement is carried out
without bouncing or bumping.
l
Therefore provide sufficient throttling and damping.
l
Please observe the information in the catalog data sheet.
CAUTION
Material damage due to opened exhaust air throttle valves!
If during first actuation the exhaust throttle valves are open, the
product may move in an uncontrolled manner.
l
Close the exhaust air throttle valves completely before
applying pressure.
To Next Page
Loading...
