Commissioning
14.00 | SRU | Assembly and Operating Manual | en | 389439 29
3. Continue to open the exhaust throttle valve incrementally
until the movement decelerates smoothly.
ð If the speed is too low, the product will brake too soon
and the end position will be reached too slowly.
ð If the speed is too high, the product will impact against
the end position and the shock absorber will be
overloaded.
NOTE
A smooth motion may also be too slow in many use-cases.
Further settings can be made via the shock
absorbers, }6.2 [/30].
To Next Page
Loading...
