Table of contents
10.00 | SWS 005 – 300 | Assembly and Operating Manual | en | 389456
5
8 Maintenance and Care............................................................................................45
8.1 Preventive Maintenance .................................................................................... 45
8.2 Lubrication.......................................................................................................... 47
8.2.1 External...................................................................................................47
8.2.2 Internal ...................................................................................................47
8.3 Cleaning and Lubrication of the Locking Mechanism ........................................ 47
8.3.1
Cleaning and Lubrication of the Locking Mechanism and Alignment Pins... 47
8.3.2 Cleaning the Bearing Race and Alignment Pin Bushings (SWA)..............49
8.4 Service of the sensors......................................................................................... 49
8.4.1 Proximity Sensor Adjustment, Test, or Replacement - SWS-011............49
8.4.2 Proximity Sensor Adjustment, Test, or Replacement - SWS
020/021/040/060/071/100/150.............................................................51
8.4.3 Magnetic Proximity Sensor Test or Replacement - SWS-007 .................53
8.4.4
Lock and Unlock Sensor Assembly Replacement (with Sensor
Assemblies for SWS 040Q, 046, 076, 110, 160) ................................... 54
8.5 Rubber Bushings................................................................................................. 55
8.5.1 Seal Inspection and Replacement for Electrical Modules.......................57
8.6 Alignment Pins.................................................................................................... 57
8.6.1 Replacemanent - SWS 005 / 011 /007....................................................57
8.6.2 Replacemanent - SWS 046 / 076 / 110 /160 ..........................................58
8.7 Disassembly of the SWK Quick-change head ..................................................... 60
8.7.1 Disassembly of SWK 005 - 011 ...............................................................60
8.7.2 Disassembly of SWK 020 - 300 ...............................................................61
9 Assembly drawings .................................................................................................62
9.1 Assembly SWS-005/011...................................................................................... 62
9.2 Assembly SWS-007 ............................................................................................. 63
9.3 Assembly SWS-020/021/041/060/071/150/300 ...............................................64
9.4 Assembly SWS-027 ............................................................................................. 65
9.5 Assembly SWS-046 ............................................................................................. 66
9.6 Assembly SWS-076/110/160 .............................................................................. 67
10 Translation of original declaration of incorporation ................................................68
11 Annex to Declaration of Incorporation....................................................................69
To Next Page
Loading...
