Safety
Startup 250:Users:Danny:Desktop:Operation manuals:line pumps:maverick
(P305):pHseriesSAFETY.fm
19
Operation Manual - SP 305
Warning Labels (Decals)
Each machine is equipped with a set of warning labels
specific to the model, boom style and installed options.
Safety decals MUST be replaced if they are damaged,
faded, missing, or unreadable for any reason.
Ultraviolet radiation, rain, steam cleaning, and other
factors cause these labels to fade in time. Sets include
outrigger load labels, but they do not include metal
plates, which can be ordered separately. For installation
locations, see the decal location guide insert found in
the Appendix section of this manual. To get
replacement labels, identify which label(s) you need
from the diagrams and lists, get the serial number of
the unit from the serial number plate, and call the
Schwing America Call Center at 888- Schwing (724-
9464). The person taking the order will make a note of
the serial number of the unit for our files and send you
the labels you need. You may order complete sets or
single labels. If the serial number plate is missing or
unreadable, the number is stamped into the subframe
just below the normal location of the serial number
plate.
To Next Page
Loading...
